NANUK™ CASES
Die "Nanuk" Koffer stehen für ultimativen Schutz und Langlebigkeit, entwickelt, um selbst den härtesten Bedingungen standzuhalten. Diese in Nordamerika hergestellten Koffer bestehen aus dem äußerst robusten NK-7-Harz, das ihnen eine unübertroffene Widerstandsfähigkeit gegen Stöße, Staub und Wasser verleiht. Dank des patentierten PowerClaw-Verschlusssystems bleiben die Koffer fest verschlossen, bis sie gewollt geöffnet werden. Mit einer Vielzahl von Modellen, darunter Optionen für Waffen, Fotoausrüstung, empfindliche Elektronik und mehr, bieten die Nanuk Koffer eine maßgeschneiderte Lösung für alle Transportanforderungen.
Besonders hervorzuheben sind die kugelgelagerten Räder aus Edelstahl bei einigen Modellen, die eine einfache Handhabung auch auf unebenem Gelände ermöglichen. Die Koffer sind für extreme Temperaturen von -29°C bis 60°C ausgelegt und bieten durch IP67-Zertifizierung Schutz vor Wasser und Staub. Die verstärkten Ecken und die solide Bauweise garantieren zusätzliche Sicherheit bei Stößen und Erschütterungen. Ob auf Expeditionen, in der Industrie oder beim Transport empfindlicher Ausrüstung – die Nanuk Koffer bieten stets zuverlässigen Schutz.
Alle Koffer sind mit einer lebenslangen Garantie ausgestattet, was die Langlebigkeit und die Qualität der Produkte unterstreicht. Zusätzlich sind viele Modelle flugtauglich und entsprechen militärischen Standards, was sie zur perfekten Wahl für professionelle Anwender macht. Vertrauen Sie auf die Qualität der Nanuk Koffer für den besten Schutz Ihrer wertvollen Ausrüstung.
Prod. no.:
903S
NANUK™ 903
Internal dimensions LxWxD: 188 x 124 x 79 mm
Perfect for organizing, protecting and carrying your most important smaller gear, the NANUK 903 waterproof hard case is impenetrable and indestructible with a lightweight, tough resin shell and double side-mounted PowerClaw superior latching system. With Nanuk’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. Waterproof, dustproof, and indestructible, the 903 is ideal for batteries, lenses, smartphones, flash drives, hard drives, small cameras, microphone systems, small pistols, medical devices, first aid kits, emergency gear, sensitive instruments, electronic equipment or any other smaller personal or professional equipment that might need superior protection. The NANUK 903 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes, so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam or the case can be purchased empty.
Perfect for organizing, protecting and carrying your most important smaller gear, the NANUK 903 waterproof hard case is impenetrable and indestructible with a lightweight, tough resin shell and double side-mounted PowerClaw superior latching system. With Nanuk’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. Waterproof, dustproof, and indestructible, the 903 is ideal for batteries, lenses, smartphones, flash drives, hard drives, small cameras, microphone systems, small pistols, medical devices, first aid kits, emergency gear, sensitive instruments, electronic equipment or any other smaller personal or professional equipment that might need superior protection. The NANUK 903 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes, so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam or the case can be purchased empty.
Prod. no.:
904S-000BK-0A0
NANUK™ 904
Internal dimensions LxWxD: 213 x 152 x 94 mm
Perfect to organize, protect and carry your most important smaller gear, the NANUK 904 waterproof hard case is impenetrable and indestructible with a lightweight, tough resin shell and double side-mounted PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. Waterproof, dustproof, and indestructible, the NANUK 904 is ideal for batteries, lenses, smartphones, flash drives, hard drives, cameras, microphone systems, small pistols, medical devices, first aid kits, emergency gear, sensitive instruments, electronic equipment or any other smaller personal or professional equipment that might need superior protection. The NANUK 904 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This protective case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. The NANUK 904 MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam or the case can be purchased empty.
Perfect to organize, protect and carry your most important smaller gear, the NANUK 904 waterproof hard case is impenetrable and indestructible with a lightweight, tough resin shell and double side-mounted PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. Waterproof, dustproof, and indestructible, the NANUK 904 is ideal for batteries, lenses, smartphones, flash drives, hard drives, cameras, microphone systems, small pistols, medical devices, first aid kits, emergency gear, sensitive instruments, electronic equipment or any other smaller personal or professional equipment that might need superior protection. The NANUK 904 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This protective case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. The NANUK 904 MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam or the case can be purchased empty.
Prod. no.:
905S-000BK-0A0
NANUK™ 905
Internal dimensions LxWxD: 240 x 185 x 135 mm
Perfect to organize, protect and carry your bulkier but still compact items, the NANUK 905 waterproof hard case is impenetrable and indestructible with a lightweight, tough resin shell and double side-mounted PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. Waterproof, dustproof, and indestructible, the NANUK 905 is ideal for batteries, lenses, smartphones, flash drives, hard drives, cameras, microphone systems, pistols, fishing gear, binoculars, scopes, tools or any other smaller personal or professional equipment that might need superior protection. The NANUK 905 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. It’s also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Perfect to organize, protect and carry your bulkier but still compact items, the NANUK 905 waterproof hard case is impenetrable and indestructible with a lightweight, tough resin shell and double side-mounted PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. Waterproof, dustproof, and indestructible, the NANUK 905 is ideal for batteries, lenses, smartphones, flash drives, hard drives, cameras, microphone systems, pistols, fishing gear, binoculars, scopes, tools or any other smaller personal or professional equipment that might need superior protection. The NANUK 905 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. It’s also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Prod. no.:
908S-000BK-0A0
NANUK™ 908
Internal dimensions LxWxD: 241 x 190 x 190 mm
Organizing, protecting and carrying mid-size items is what the NANUK 908 does best. This waterproof hard case is impenetrable and indestructible and features a deep base for lots of storage options. A lightweight, tough resin shell and double side-mounted PowerClaw superior latching system ensure that nothing gets in. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. Waterproof, dustproof, and indestructible, the 908 is ideal for camera/video gear, batteries, lenses, flash drives, hard drives, microphone systems, pistols, fishing gear, binoculars, scopes, medical devices, instrumentation, industrial tools or any other. The NANUK 908 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Organizing, protecting and carrying mid-size items is what the NANUK 908 does best. This waterproof hard case is impenetrable and indestructible and features a deep base for lots of storage options. A lightweight, tough resin shell and double side-mounted PowerClaw superior latching system ensure that nothing gets in. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. Waterproof, dustproof, and indestructible, the 908 is ideal for camera/video gear, batteries, lenses, flash drives, hard drives, microphone systems, pistols, fishing gear, binoculars, scopes, medical devices, instrumentation, industrial tools or any other. The NANUK 908 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Prod. no.:
909S-000BK-0A0
NANUK™ 909
Internal dimensions LxWxD: 291 x 178 x 93 mm
Built to organize, protect, carry and survive tough conditions, the NANUK 909 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and its PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. Lightweight, rugged and compact, the NANUK 909 hard case adapts to every environment. It’s favored by photographers, videographers, outdoor enthusiasts, sportsmen, law enforcement officers, military, hunters and shooting sports enthusiasts to protect their most valuable gear. The slim profile of the NANUK 909 protective case makes it perfect for storing handguns, small drones, electronics and components or compact tools and equipment. It offers the perfect storage room for a small ultrabook laptop, tablet, sample kit, outdoor equipment, knives, small cameras, thinner accessories and more! The NANUK 909 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam or the case can be purchased empty.
Built to organize, protect, carry and survive tough conditions, the NANUK 909 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and its PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. Lightweight, rugged and compact, the NANUK 909 hard case adapts to every environment. It’s favored by photographers, videographers, outdoor enthusiasts, sportsmen, law enforcement officers, military, hunters and shooting sports enthusiasts to protect their most valuable gear. The slim profile of the NANUK 909 protective case makes it perfect for storing handguns, small drones, electronics and components or compact tools and equipment. It offers the perfect storage room for a small ultrabook laptop, tablet, sample kit, outdoor equipment, knives, small cameras, thinner accessories and more! The NANUK 909 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam or the case can be purchased empty.
Prod. no.:
910S-000BK-0A0
NANUK™ 910
Internal dimensions LxWxD: 336 x 234 x 104 mm
Built to organize, protect, carry and survive tough conditions, the NANUK 910 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and its PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. The NANUK 910 is built to take abuse so your gear doesn’t. Lightweight, rugged and compact, the NANUK 910 hard case adapts to every environment. It’s a favorite of photographers, videographers, outdoor enthusiasts, sportsmen, law enforcement officers, military, hunters and shooting sports enthusiasts to protect their most valuable gear. The slim profile of the NANUK 910 protective case makes it perfect for protecting small laptops, tablets, small cameras, electronics, handguns, small drones, sample kits, compact tools, and equipment of all sorts. The NANUK 910 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam or the case can be purchased empty.
Built to organize, protect, carry and survive tough conditions, the NANUK 910 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and its PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. The NANUK 910 is built to take abuse so your gear doesn’t. Lightweight, rugged and compact, the NANUK 910 hard case adapts to every environment. It’s a favorite of photographers, videographers, outdoor enthusiasts, sportsmen, law enforcement officers, military, hunters and shooting sports enthusiasts to protect their most valuable gear. The slim profile of the NANUK 910 protective case makes it perfect for protecting small laptops, tablets, small cameras, electronics, handguns, small drones, sample kits, compact tools, and equipment of all sorts. The NANUK 910 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam or the case can be purchased empty.
Prod. no.:
915S-000BK-0A0
NANUK™ 915
Internal dimensions LxWxD: 351 x 236 x 157 mm
Built to take abuse so your valuable gear doesn’t, the NANUK 915 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and its PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. The NANUK 915 organizes, protects, carries and survives in any condition, especially tough ones. The NANUK 915 is a favorite of photographers, videographers, drone operators/pilots, outdoor enthusiasts, sportsmen, law enforcement officers, first responders, military, hunters, shooting sports enthusiasts, medical professionals, and many more to protect their most valuable gear. The slim profile, but generous capacity of the NANUK 915 case makes it perfect for protecting small laptops, tablets, small cameras, electronics, handguns, small drones, sample kits, medical equipment, compact tools, and equipment of all sorts. Lightweight, rugged and compact, the NANUK 915 hard case adapts to every environment. The NANUK 915 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Built to take abuse so your valuable gear doesn’t, the NANUK 915 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and its PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. The NANUK 915 organizes, protects, carries and survives in any condition, especially tough ones. The NANUK 915 is a favorite of photographers, videographers, drone operators/pilots, outdoor enthusiasts, sportsmen, law enforcement officers, first responders, military, hunters, shooting sports enthusiasts, medical professionals, and many more to protect their most valuable gear. The slim profile, but generous capacity of the NANUK 915 case makes it perfect for protecting small laptops, tablets, small cameras, electronics, handguns, small drones, sample kits, medical equipment, compact tools, and equipment of all sorts. Lightweight, rugged and compact, the NANUK 915 hard case adapts to every environment. The NANUK 915 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Prod. no.:
918S-000BK-0A0
NANUK™ 918
Internal dimensions LxWxD: 378 x 249 x 218 mm
Great for medium size gear, the NANUK 918 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and its PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. The NANUK 918 organizes, protects, carries and survives in any condition, especially tough ones. The NANUK 918 has become the go-to protective model for photographers, videographers, drone operators/pilots, outdoor enthusiasts, sportsmen, law enforcement officers, first responders, military, hunters, shooting sports enthusiasts, medical professionals, and many more to protect their most valuable gear. The generous capacity of the NANUK 918 case makes it perfect for protecting cameras, electronics, boating gear, handguns, small drones, sample kits, first aid supplies, medical equipment, compact tools, and equipment of all sorts. Lightweight, rugged and compact, the NANUK 918 hard case adapts to every environment. The NANUK 918 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Great for medium size gear, the NANUK 918 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and its PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. The NANUK 918 organizes, protects, carries and survives in any condition, especially tough ones. The NANUK 918 has become the go-to protective model for photographers, videographers, drone operators/pilots, outdoor enthusiasts, sportsmen, law enforcement officers, first responders, military, hunters, shooting sports enthusiasts, medical professionals, and many more to protect their most valuable gear. The generous capacity of the NANUK 918 case makes it perfect for protecting cameras, electronics, boating gear, handguns, small drones, sample kits, first aid supplies, medical equipment, compact tools, and equipment of all sorts. Lightweight, rugged and compact, the NANUK 918 hard case adapts to every environment. The NANUK 918 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Prod. no.:
920S-000BK-0A0
NANUK™ 920
Internal dimensions LxWxD: 381 x 267 x 157 mm
Built to take abuse so your valuable gear doesn’t, the NANUK 920 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and its PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. The NANUK 920 organizes, protects, carries and survives in any conditions, especially tough ones. It takes the abuse so valuable gear inside doesn’t. The NANUK 920 is a favorite of photographers, videographers, drone operators/pilots, outdoor enthusiasts, sportsmen, law enforcement officers, first responders, military, hunters, shooting sports enthusiasts, medical professionals, and many more to protect their most valuable gear. The slim profile, but generous capacity of the NANUK 920 case makes it perfect for protecting laptops, tablets, camera with lens and accessories, drones, electronics, two (2) handguns with accessories, sample kits, medical equipment, first aid supplies, outdoor equipment, knives, boating gear, fishing sonar, tools, and equipment of all sorts. Lightweight, rugged and compact, the NANUK 920 hard case adapts to every environment. The NANUK 920 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Built to take abuse so your valuable gear doesn’t, the NANUK 920 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and its PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. The NANUK 920 organizes, protects, carries and survives in any conditions, especially tough ones. It takes the abuse so valuable gear inside doesn’t. The NANUK 920 is a favorite of photographers, videographers, drone operators/pilots, outdoor enthusiasts, sportsmen, law enforcement officers, first responders, military, hunters, shooting sports enthusiasts, medical professionals, and many more to protect their most valuable gear. The slim profile, but generous capacity of the NANUK 920 case makes it perfect for protecting laptops, tablets, camera with lens and accessories, drones, electronics, two (2) handguns with accessories, sample kits, medical equipment, first aid supplies, outdoor equipment, knives, boating gear, fishing sonar, tools, and equipment of all sorts. Lightweight, rugged and compact, the NANUK 920 hard case adapts to every environment. The NANUK 920 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Prod. no.:
923S-001BK-0A0
NANUK™ 923
Internal dimensions LxWxD: 424 x 287 x 138 mm
Rubber feet provide secure grip on all surfaces without scratching, while the two standard TSA locking latches protect your gear during your travels. The spring-loaded handle retracts when not in use and the reinforced padlock eyelets add another layer of protection for expensive equipment. Protection never looked so good. Rugged, waterproof and dustproof, the 923 hard case adapts to every environment. The NANUK 923 is favored by business people, industrial, construction and worksite teams, drone operators, photographers, sportsmen, law officers, military, medical professionals, hunters and shooting sports enthusiasts to protect their most valuable gear. The NANUK 923 offers a perfect storage room for a laptop, camera with a lens and accessories, drones, tools, medical equipment, music equipment, two pistols with attachments and accessories, outdoor equipment, knives, fishing sonar, smaller tools, electronics and accessories. The NANUK 923 protective case comes with a soft grip and ergonomic handle to make it easy to transport. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. For extra security, the two latches feature an integrated TSA accepted key lock to keep your equipment securely locked during transit but accessible for inspection by the TSA when required. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Rubber feet provide secure grip on all surfaces without scratching, while the two standard TSA locking latches protect your gear during your travels. The spring-loaded handle retracts when not in use and the reinforced padlock eyelets add another layer of protection for expensive equipment. Protection never looked so good. Rugged, waterproof and dustproof, the 923 hard case adapts to every environment. The NANUK 923 is favored by business people, industrial, construction and worksite teams, drone operators, photographers, sportsmen, law officers, military, medical professionals, hunters and shooting sports enthusiasts to protect their most valuable gear. The NANUK 923 offers a perfect storage room for a laptop, camera with a lens and accessories, drones, tools, medical equipment, music equipment, two pistols with attachments and accessories, outdoor equipment, knives, fishing sonar, smaller tools, electronics and accessories. The NANUK 923 protective case comes with a soft grip and ergonomic handle to make it easy to transport. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. For extra security, the two latches feature an integrated TSA accepted key lock to keep your equipment securely locked during transit but accessible for inspection by the TSA when required. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Prod. no.:
925S-000BK-0A0
NANUK™ 925
Internal dimensions LxWxD: 432 x 300 x 163 mm
The elements don’t stand a chance against the NANUK 925. Equipment arrives at its destination dry, scratch-free, unharmed, working well and dust-free with this case. The NANUK 925 is built to organize, protect, carry and take the abuse so equipment doesn’t. The secret is its impenetrable and indestructible lightweight, tough NK-7 resin shell and it’s PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, the case stays shut and secured until you are ready to open it. The NANUK 925 adapts to every environment and is a favorite of photographers, videographers, drone operators/pilots, medical professionals, outdoor enthusiasts, sportsmen, law officers, military, hunters and shooting sports enthusiasts to protect their most valuable gear. The NANUK 925 offers superior protection for a camera with a lens and accessories, drones, tools, music equipment, two pistols with attachments and accessories, outdoor equipment, team satellite phones, CB radio, fishing sonar, smaller tools, medical equipment, electronics, accessories and so much more. The NANUK 925 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
The elements don’t stand a chance against the NANUK 925. Equipment arrives at its destination dry, scratch-free, unharmed, working well and dust-free with this case. The NANUK 925 is built to organize, protect, carry and take the abuse so equipment doesn’t. The secret is its impenetrable and indestructible lightweight, tough NK-7 resin shell and it’s PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, the case stays shut and secured until you are ready to open it. The NANUK 925 adapts to every environment and is a favorite of photographers, videographers, drone operators/pilots, medical professionals, outdoor enthusiasts, sportsmen, law officers, military, hunters and shooting sports enthusiasts to protect their most valuable gear. The NANUK 925 offers superior protection for a camera with a lens and accessories, drones, tools, music equipment, two pistols with attachments and accessories, outdoor equipment, team satellite phones, CB radio, fishing sonar, smaller tools, medical equipment, electronics, accessories and so much more. The NANUK 925 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Prod. no.:
930S-000BK-0A0
NANUK™ 930
Internal dimensions LxWxD: 457 x 330 x 175 mm
The lightweight NANUK 930 secures bulkier equipment that is sensitive to the elements. Its waterproof, dustproof, impenetrable and indestructible NK-7 resin shell and stays shut tight with its PowerClaw superior latching system. Built to organize, protect, carry and survive tough conditions and perfect for transporting everything from medical equipment to drones and camera accessories. The NANUK 930 adapts to every environment and is a favorite of photographers, videographers, drone operators/pilots, medical professionals, outdoor enthusiasts, sportsmen, law officers, first responders, military, hunters and shooting sports enthusiasts to protect their most valuable gear. The NANUK 930 offers perfect storage and protection for a camera with a lens and accessories, drones, tools, music equipment, two pistols with attachments and accessories, outdoor equipment, team satellite phones, CB radio, fishing sonar, smaller tools, medical equipment, electronics, accessories and so much more. The NANUK 930 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
The lightweight NANUK 930 secures bulkier equipment that is sensitive to the elements. Its waterproof, dustproof, impenetrable and indestructible NK-7 resin shell and stays shut tight with its PowerClaw superior latching system. Built to organize, protect, carry and survive tough conditions and perfect for transporting everything from medical equipment to drones and camera accessories. The NANUK 930 adapts to every environment and is a favorite of photographers, videographers, drone operators/pilots, medical professionals, outdoor enthusiasts, sportsmen, law officers, first responders, military, hunters and shooting sports enthusiasts to protect their most valuable gear. The NANUK 930 offers perfect storage and protection for a camera with a lens and accessories, drones, tools, music equipment, two pistols with attachments and accessories, outdoor equipment, team satellite phones, CB radio, fishing sonar, smaller tools, medical equipment, electronics, accessories and so much more. The NANUK 930 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Prod. no.:
933S-000BK-0A0
NANUK™ 933
Internal dimensions LxWxD: 452 x 330 x 239 mm
The NANUK 933 stands up to water, shock, dust and just about any threat to your sensitive gear from drones to medical equipment and everything in between. It’s built to organize, protect, carry and survive tough conditions, with an impenetrable and indestructible with a lightweight, tough NK-7 resin shell and dual PowerClaw superior latches. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. Its deep base makes it a favorite of photographers and videographers, drone operators/pilots, medical professionals, outdoor enthusiasts, sportsmen, law enforcement officers, first responders, military, hunters and shooting sports enthusiasts to protect their most valuable gear. The NANUK 933 offers perfect storage and maximum protection for a camera with a lens and accessories, drones, tools, medical equipment, first aid supplies, rescue gear, satellite phones, music equipment, two pistols with attachments and accessories, outdoor equipment, a CB radio, fishing sonar, power and hand tools, electronics and accessories and so much more. The NANUK 933 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
The NANUK 933 stands up to water, shock, dust and just about any threat to your sensitive gear from drones to medical equipment and everything in between. It’s built to organize, protect, carry and survive tough conditions, with an impenetrable and indestructible with a lightweight, tough NK-7 resin shell and dual PowerClaw superior latches. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. Its deep base makes it a favorite of photographers and videographers, drone operators/pilots, medical professionals, outdoor enthusiasts, sportsmen, law enforcement officers, first responders, military, hunters and shooting sports enthusiasts to protect their most valuable gear. The NANUK 933 offers perfect storage and maximum protection for a camera with a lens and accessories, drones, tools, medical equipment, first aid supplies, rescue gear, satellite phones, music equipment, two pistols with attachments and accessories, outdoor equipment, a CB radio, fishing sonar, power and hand tools, electronics and accessories and so much more. The NANUK 933 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Prod. no.:
935S-000BK-0A0
NANUK™ 935
Internal dimensions LxWxD: 521 x 287 x 191 mm
If you were designing the perfect waterproof, protective case that can go anywhere and do anything we bet that you would start with the NANUK 935. Three soft-grip handles make this wheeled case one of the most convenient on the market, but that’s only the beginning. Polyurethane wheels withstand rough terrain while the one-handed retractable handle makes it easy to use and versatile. No matter where you’re headed, you’re guaranteed a smooth and hassle-free trip. Built to organize, protect, carry and survive tough conditions, the NANUK 935 waterproof hard case will take the abuse so your gear doesn’t. It’s impenetrable and indestructible with a lightweight, tough NK-7 resin shell and its PowerClaw superior latching system gives you unmatched peace of mind. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. Measuring 22x14x9” it can store a whole lot of essential gear and still be carried on most airlines. The NANUK 935 protective case is convenient even when full of equipment and weighed down. Simply press the button and the retractable handle extends to your choice of two positions and the NANUK 935 is ready to be wheeled to your destination with your photo gear, video gear, audio gear, medical equipment, industrial equipment, outdoor gear, personal effects and much more safely inside. The 935’s two handles feature stainless steel hardware and cleverly retract to keep the handles out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
If you were designing the perfect waterproof, protective case that can go anywhere and do anything we bet that you would start with the NANUK 935. Three soft-grip handles make this wheeled case one of the most convenient on the market, but that’s only the beginning. Polyurethane wheels withstand rough terrain while the one-handed retractable handle makes it easy to use and versatile. No matter where you’re headed, you’re guaranteed a smooth and hassle-free trip. Built to organize, protect, carry and survive tough conditions, the NANUK 935 waterproof hard case will take the abuse so your gear doesn’t. It’s impenetrable and indestructible with a lightweight, tough NK-7 resin shell and its PowerClaw superior latching system gives you unmatched peace of mind. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. Measuring 22x14x9” it can store a whole lot of essential gear and still be carried on most airlines. The NANUK 935 protective case is convenient even when full of equipment and weighed down. Simply press the button and the retractable handle extends to your choice of two positions and the NANUK 935 is ready to be wheeled to your destination with your photo gear, video gear, audio gear, medical equipment, industrial equipment, outdoor gear, personal effects and much more safely inside. The 935’s two handles feature stainless steel hardware and cleverly retract to keep the handles out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Prod. no.:
938S-000BK-0A0
NANUK™ 938
Internal dimensions LxWxD: 546 x 318 x 294 mm
The NANUK 938 can store a whole lot of your essentials. At 21.5” long and nearly 12” deep, it offers the maximum level of protection for all of your personal and professional equipment. The NANUK 938 has the convenience of polyurethane wheels to make it easy to travel with your photo gear, video gear, audio gear, industrial equipment, medical equipment, outdoor gear and much more! Built to organize, protect, carry and survive tough conditions. The 938 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and it’s dual PowerClaw latches. With NANUK’s exclusive locking and latching system, the NANUK 938 case stays shut and secured until you are ready to open it. Three soft-grip handles make this wheeled case one of the most convenient on the market. The 938's polyurethane wheels withstand rough terrain while the one-handed retractable handle offers unparalleled usability. No matter where you go, you're guaranteed a smooth and easy ride. You can trust the world’s best protective case to get your gear safely from point A to point B. The NANUK 938 protective case comes with one retractable and three soft grip and ergonomic handles with stainless steel hardware and integrated springs to keep the handles out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
The NANUK 938 can store a whole lot of your essentials. At 21.5” long and nearly 12” deep, it offers the maximum level of protection for all of your personal and professional equipment. The NANUK 938 has the convenience of polyurethane wheels to make it easy to travel with your photo gear, video gear, audio gear, industrial equipment, medical equipment, outdoor gear and much more! Built to organize, protect, carry and survive tough conditions. The 938 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and it’s dual PowerClaw latches. With NANUK’s exclusive locking and latching system, the NANUK 938 case stays shut and secured until you are ready to open it. Three soft-grip handles make this wheeled case one of the most convenient on the market. The 938's polyurethane wheels withstand rough terrain while the one-handed retractable handle offers unparalleled usability. No matter where you go, you're guaranteed a smooth and easy ride. You can trust the world’s best protective case to get your gear safely from point A to point B. The NANUK 938 protective case comes with one retractable and three soft grip and ergonomic handles with stainless steel hardware and integrated springs to keep the handles out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Prod. no.:
940S-000BK-0A0
NANUK™ 940
Internal dimensions LxWxD: 508 x 356 x 203 mm
The large but lightweight NANUK 940 secures bulkier equipment that is sensitive to the elements. Its waterproof, dustproof, impenetrable and indestructible NK-7 resin shell and stays shut tight with its PowerClaw superior latching system. Built to organize, protect, carry and survive tough conditions and perfect for transporting everything from medical equipment to drones and camera accessories. Your equipment receives first-class protection with the NANUK 940. It features an integrated bezel system and adapts to every environment. It’s become a favorite of photographers, videographers, drone operators/pilots, outdoor enthusiasts, sportsmen, law officers, first responders, medical professionals, military, hunters and shooting sports enthusiasts to protect their most valuable gear. The NANUK 940 offers perfect storage and protection for a camera with a lens and accessories, drones, tools, music equipment, handguns with attachments and accessories, outdoor equipment, tools, medical equipment, electronics, accessories and so much more. Built to organize, protect, carry and survive tough conditions, the 940 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and it’s PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. The NANUK 940 protective case comes with a soft grip and ergonomic handle to make it easy to transport.
The large but lightweight NANUK 940 secures bulkier equipment that is sensitive to the elements. Its waterproof, dustproof, impenetrable and indestructible NK-7 resin shell and stays shut tight with its PowerClaw superior latching system. Built to organize, protect, carry and survive tough conditions and perfect for transporting everything from medical equipment to drones and camera accessories. Your equipment receives first-class protection with the NANUK 940. It features an integrated bezel system and adapts to every environment. It’s become a favorite of photographers, videographers, drone operators/pilots, outdoor enthusiasts, sportsmen, law officers, first responders, medical professionals, military, hunters and shooting sports enthusiasts to protect their most valuable gear. The NANUK 940 offers perfect storage and protection for a camera with a lens and accessories, drones, tools, music equipment, handguns with attachments and accessories, outdoor equipment, tools, medical equipment, electronics, accessories and so much more. Built to organize, protect, carry and survive tough conditions, the 940 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and it’s PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. The NANUK 940 protective case comes with a soft grip and ergonomic handle to make it easy to transport.
Prod. no.:
945S-000BK-0A0
NANUK™ 945
Internal dimensions LxWxD: 559 x 432 x 208 mm
Even the most turbulent conditions don't stand a chance against the NANUK 945. With four PowerClaw latches and NK-7 resin shell, it's the perfect case for medical equipment, camera gear, firearms, drones, and any other bulky valuables. Totally waterproof, this protective case also withstands extreme temperatures and extreme abuse so the gear inside doesn’t. A favorite among photographers and videographers, the deep and wide NANUK 945 hard case adapts to every environment. Drone operators/pilots, outdoor enthusiasts, sportsmen, first responders, law enforcement officers, first responders, medical professionals, military, hunters and shooting sports enthusiasts also trust this case to protect their most valuable gear. The NANUK 945 offers a perfect storage room for medical gear, a camera with a lens and accessories, drones, tools, music equipment, outdoor equipment, tools, electronics, accessories and so much more. The NANUK 945 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Even the most turbulent conditions don't stand a chance against the NANUK 945. With four PowerClaw latches and NK-7 resin shell, it's the perfect case for medical equipment, camera gear, firearms, drones, and any other bulky valuables. Totally waterproof, this protective case also withstands extreme temperatures and extreme abuse so the gear inside doesn’t. A favorite among photographers and videographers, the deep and wide NANUK 945 hard case adapts to every environment. Drone operators/pilots, outdoor enthusiasts, sportsmen, first responders, law enforcement officers, first responders, medical professionals, military, hunters and shooting sports enthusiasts also trust this case to protect their most valuable gear. The NANUK 945 offers a perfect storage room for medical gear, a camera with a lens and accessories, drones, tools, music equipment, outdoor equipment, tools, electronics, accessories and so much more. The NANUK 945 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Prod. no.:
950S-000BK-0A0
NANUK™ 950
Internal dimensions LxWxD: 521 x 389 x 256 mm
Even at 20.5” long and 15.3” deep, the NANUK 950 makes moving heavy equipment easy. Its polyurethane wheels are smooth on all surfaces and the one-handed retractable handle gets you from point A to B without breaking a sweat. The same tough PowerClaw superior latching system, indestructible and impenetrable NK-7 resin shell but with wheeled convenience. With NANUK’s exclusive locking and latching system, the NANUK 950 stays shut and secured until you are ready to open it. Built to organize, protect, carry and survive tough conditions. The NANUK 950 hard case offers the maximum level of protection for all of your professional equipment. The protective case adds the convenience of wheels to make it much easier to travel with your photo gear, video gear, audio gear, industrial equipment, electronics, medical equipment, outdoor gear and much more! Three soft-grip handles make this wheeled case one of the most convenient and easy-to-handle on the market. The 950's polyurethane wheels withstand rough terrain while the one-handed retractable handle offers unparalleled usability. The NANUK 950’s ergonomic handles feature stainless steel hardware and integrated handle stays to keep the handles out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Even at 20.5” long and 15.3” deep, the NANUK 950 makes moving heavy equipment easy. Its polyurethane wheels are smooth on all surfaces and the one-handed retractable handle gets you from point A to B without breaking a sweat. The same tough PowerClaw superior latching system, indestructible and impenetrable NK-7 resin shell but with wheeled convenience. With NANUK’s exclusive locking and latching system, the NANUK 950 stays shut and secured until you are ready to open it. Built to organize, protect, carry and survive tough conditions. The NANUK 950 hard case offers the maximum level of protection for all of your professional equipment. The protective case adds the convenience of wheels to make it much easier to travel with your photo gear, video gear, audio gear, industrial equipment, electronics, medical equipment, outdoor gear and much more! Three soft-grip handles make this wheeled case one of the most convenient and easy-to-handle on the market. The 950's polyurethane wheels withstand rough terrain while the one-handed retractable handle offers unparalleled usability. The NANUK 950’s ergonomic handles feature stainless steel hardware and integrated handle stays to keep the handles out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Prod. no.:
955S-000BK-0A0
NANUK™ 955
Internal dimensions LxWxD: 559 x 432 x 259 mm
The waterproof NANUK 955 case has been designed to organize, protect, transport, and withstand even the harshest conditions. It is impenetrable and indestructible thanks to its lightweight and robust NK-7 resin material and superior PowerClaw latching system. With NANUK's exclusive locking and latching system, your case remains securely closed until you are ready to open it.The NANUK 955 features four robust latches.Measuring 22 inches in length and nearly 10 inches in depth, the NANUK 955 offers ample space for a variety of items you may need. The NANUK 955 hard shell case provides maximum protection for your personal and professional equipment.Furthermore, this protective case offers the convenience of wheels to facilitate the transport of photo, video, audio, industrial, and outdoor equipment, and much more! Three soft-grip handles make this wheeled case one of the most practical options on the market.The 955's polyurethane wheels withstand rough terrain, while the one-handed retractable handle provides unparalleled ease of use.Wherever you go, a smooth ride is guaranteed. The NANUK 955 case with two-stage retractable handle and super-smooth polyurethane wheels securely and comfortably transports your equipment from point A to point B.The NANUK 955 protective case is equipped with three ergonomic soft-grip handles to facilitate transportation.Additionally, it features stainless steel hardware and integrated springs to prevent damage to the handles during transport. This transport case also comes with an automatic pressure release valve and an integrated bezel system, allowing for the attachment of custom panels without the need for drilling holes, thus ensuring the case remains waterproof.This MIL-Spec injection-molded case comes with a lifetime warranty. Inside, products can be secured with diced foam, custom foam, padded dividers, or the case can be purchased empty.
The waterproof NANUK 955 case has been designed to organize, protect, transport, and withstand even the harshest conditions. It is impenetrable and indestructible thanks to its lightweight and robust NK-7 resin material and superior PowerClaw latching system. With NANUK's exclusive locking and latching system, your case remains securely closed until you are ready to open it.The NANUK 955 features four robust latches.Measuring 22 inches in length and nearly 10 inches in depth, the NANUK 955 offers ample space for a variety of items you may need. The NANUK 955 hard shell case provides maximum protection for your personal and professional equipment.Furthermore, this protective case offers the convenience of wheels to facilitate the transport of photo, video, audio, industrial, and outdoor equipment, and much more! Three soft-grip handles make this wheeled case one of the most practical options on the market.The 955's polyurethane wheels withstand rough terrain, while the one-handed retractable handle provides unparalleled ease of use.Wherever you go, a smooth ride is guaranteed. The NANUK 955 case with two-stage retractable handle and super-smooth polyurethane wheels securely and comfortably transports your equipment from point A to point B.The NANUK 955 protective case is equipped with three ergonomic soft-grip handles to facilitate transportation.Additionally, it features stainless steel hardware and integrated springs to prevent damage to the handles during transport. This transport case also comes with an automatic pressure release valve and an integrated bezel system, allowing for the attachment of custom panels without the need for drilling holes, thus ensuring the case remains waterproof.This MIL-Spec injection-molded case comes with a lifetime warranty. Inside, products can be secured with diced foam, custom foam, padded dividers, or the case can be purchased empty.
Prod. no.:
960S-000BK-0A0
NANUK™ 960
Internal dimensions LxWxD: 559 x 432 x 327 mm
At 22 inches long and nearly 13 inches deep, the wheeled 960 is resistant to water, shock and heavy impact and can store a whole lot of your essentials. Easy to move around, the protective case gets you through any terrain with its tough polyurethane wheels and three convenient soft grip handles. Built to organize, protect, carry and survive tough conditions, the 960 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and four (4) PowerClaw latches. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. The NANUK 960 hard case offers the maximum level of protection for all of your professional equipment. The protective case adds the convenience of wheels to make it much easier to travel with your photo gear, video gear, audio gear, medical or industrial equipment, outdoor gear and much more! Three soft-grip handles make this wheeled case one of the most convenient and functional on the market. The NANUK 960's polyurethane wheels withstand rough terrain while the one-handed retractable handle offers unparalleled usability. No matter where you go, you're guaranteed a smooth ride. For total equipment protection, look no further than the NANUK 960 case with wheels to get your gear safely from point A to point B. The 960’s three (3) soft grip and ergonomic handles to make it easy and comfortable to transport. They feature stainless steel hardware and 3 handles – 1 with handle stay and 2 spring loaded - to keep the handles out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
At 22 inches long and nearly 13 inches deep, the wheeled 960 is resistant to water, shock and heavy impact and can store a whole lot of your essentials. Easy to move around, the protective case gets you through any terrain with its tough polyurethane wheels and three convenient soft grip handles. Built to organize, protect, carry and survive tough conditions, the 960 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and four (4) PowerClaw latches. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. The NANUK 960 hard case offers the maximum level of protection for all of your professional equipment. The protective case adds the convenience of wheels to make it much easier to travel with your photo gear, video gear, audio gear, medical or industrial equipment, outdoor gear and much more! Three soft-grip handles make this wheeled case one of the most convenient and functional on the market. The NANUK 960's polyurethane wheels withstand rough terrain while the one-handed retractable handle offers unparalleled usability. No matter where you go, you're guaranteed a smooth ride. For total equipment protection, look no further than the NANUK 960 case with wheels to get your gear safely from point A to point B. The 960’s three (3) soft grip and ergonomic handles to make it easy and comfortable to transport. They feature stainless steel hardware and 3 handles – 1 with handle stay and 2 spring loaded - to keep the handles out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Prod. no.:
962S-000BK-0A0
NANUK™ 962
Internal dimensions LxWxD: 771 x 419 x 236 mm
Sturdy and compact, the NANUK 962 protects and transports heavy loads with minimal effort.Equipped with two sets of high-load double wheels with stainless steel bearings, it effortlessly glides over even the most challenging terrain. It comes standard with a retractable handle, making it the perfect waterproof premium protection cart that can be taken anywhere.Like all NANUK waterproof cases, the 962 is made of impact-resistant NK-7 resin, certified for extreme shock loads and constant vibrations - in other words, it's indestructible.Additionally, it features two oversized team carry handles and five of our legendary Power Claw latches, ensuring it never opens accidentally. Shaped with deeper ribs and higher feet, it stacks well.The 962 comes with our lifetime warranty, assuring you that we build cases to protect your most valuable equipment for a lifetime.Additionally, a polycarbonate ID window can be quickly and easily attached to the front or side of the case. Other options include TSA-approved locks as an aftermarket kit, TSA-approved padlocks, a panel installation kit, foam cubes, padded dividers, and a lid organizer.
Sturdy and compact, the NANUK 962 protects and transports heavy loads with minimal effort.Equipped with two sets of high-load double wheels with stainless steel bearings, it effortlessly glides over even the most challenging terrain. It comes standard with a retractable handle, making it the perfect waterproof premium protection cart that can be taken anywhere.Like all NANUK waterproof cases, the 962 is made of impact-resistant NK-7 resin, certified for extreme shock loads and constant vibrations - in other words, it's indestructible.Additionally, it features two oversized team carry handles and five of our legendary Power Claw latches, ensuring it never opens accidentally. Shaped with deeper ribs and higher feet, it stacks well.The 962 comes with our lifetime warranty, assuring you that we build cases to protect your most valuable equipment for a lifetime.Additionally, a polycarbonate ID window can be quickly and easily attached to the front or side of the case. Other options include TSA-approved locks as an aftermarket kit, TSA-approved padlocks, a panel installation kit, foam cubes, padded dividers, and a lid organizer.
Prod. no.:
963S-000BK-0A0
NANUK™ 963
Internal dimensions LxWxD: 737 x 457 x 269 mm
Built to organize, protect, carry and survive tough conditions, the NANUK 963 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and it’s five (5) PowerClaw latches. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. At 29 inches long and nearly 11 inches deep, the NANUK 963 can store a whole lot of your essentials. The NANUK 963 hard case offers the maximum level of protection for all of your personal and professional equipment. It adds the convenience of wheels to make traveling much easier with your photo gear, video gear, audio gear, medical or industrial equipment, outdoor gear and much more! Three soft-grip handles make this wheeled case one of the most convenient and comfortable on the market. The 963's polyurethane wheels handle rough terrain with ease while the one-handed retractable handle offers unparalleled usability. For total equipment protection and loads of capacity, look no further than the NANUK 963 case retractable handle and wheels to get your gear safely from point A to point B. The NANUK 963 protective case comes with three (3) soft grip and ergonomic handles with stainless steel hardware and spring-loaded handles to keep them out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Built to organize, protect, carry and survive tough conditions, the NANUK 963 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and it’s five (5) PowerClaw latches. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. At 29 inches long and nearly 11 inches deep, the NANUK 963 can store a whole lot of your essentials. The NANUK 963 hard case offers the maximum level of protection for all of your personal and professional equipment. It adds the convenience of wheels to make traveling much easier with your photo gear, video gear, audio gear, medical or industrial equipment, outdoor gear and much more! Three soft-grip handles make this wheeled case one of the most convenient and comfortable on the market. The 963's polyurethane wheels handle rough terrain with ease while the one-handed retractable handle offers unparalleled usability. For total equipment protection and loads of capacity, look no further than the NANUK 963 case retractable handle and wheels to get your gear safely from point A to point B. The NANUK 963 protective case comes with three (3) soft grip and ergonomic handles with stainless steel hardware and spring-loaded handles to keep them out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Prod. no.:
965S-000BK-0A0
NANUK™ 965
Internal dimensions LxWxD: 737 x 457 x 356 mm
The NANUK 965 is big and strong but surprisingly easy to maneuver. At 29” long and nearly 14” deep, it’s built to organize, protect, carry a whole lot of your essentials. This waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and five (5) PowerClaw latches. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. The NANUK 965 hard case will take extreme abuse with the maximum level of protection for all of your professional equipment. This protective case adds the convenience of a retractable handle and wheels that glide to make it easier to travel with your photo gear, video gear, audio gear, medical or industrial equipment, outdoor gear and much more! Three soft-grip handles make this wheeled case one of the most convenient and comfortable on the market. The NANUK 965's polyurethane wheels handle rough terrain with ease while the one-handed retractable handle offers unparalleled usability. The NANUK 965 protective case comes with three (3) soft grip and ergonomic handles with stainless steel hardware and spring-loaded handles to make hauling large loads easy. This transport case is also equipped with an automatic pressure release. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
The NANUK 965 is big and strong but surprisingly easy to maneuver. At 29” long and nearly 14” deep, it’s built to organize, protect, carry a whole lot of your essentials. This waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and five (5) PowerClaw latches. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. The NANUK 965 hard case will take extreme abuse with the maximum level of protection for all of your professional equipment. This protective case adds the convenience of a retractable handle and wheels that glide to make it easier to travel with your photo gear, video gear, audio gear, medical or industrial equipment, outdoor gear and much more! Three soft-grip handles make this wheeled case one of the most convenient and comfortable on the market. The NANUK 965's polyurethane wheels handle rough terrain with ease while the one-handed retractable handle offers unparalleled usability. The NANUK 965 protective case comes with three (3) soft grip and ergonomic handles with stainless steel hardware and spring-loaded handles to make hauling large loads easy. This transport case is also equipped with an automatic pressure release. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Prod. no.:
968S-000BK-0A0
NANUK™ 968
Internal dimensions LxWxD: 546 x 546 x 300 mm
With more than 275 cubic inches of capacity, the NANUK 968 waterproof case with a retractable handle and easy-glide wheels can store and haul a whole lot of gear. Built to organize, protect, carry and survive tough conditions, the 968 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and it’s six (6) PowerClaw latches. With NANUK’s exclusive locking and latching system, your case stays clamped shut and secured until you are ready to open it. The NANUK 968 hard case offers the maximum level of protection for all of your personal and professional equipment. This protective case adds the convenience of wheels to make it easier to travel with your photo gear, video gear, audio gear, bigger drones, medical or industrial equipment, outdoor gear and much more! Retractable handle and a set of wheels make this case one of the most convenient on the market. The NANUK 968's polyurethane wheels handle rough terrain with ease while the one-handed retractable handle offers unparalleled usability and comfort.The three (3) soft grip and ergonomic handles make the NANUK 968 easy to transport. They feature stainless steel hardware and spring loaded handles to keep them out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release. This transport case is also equipped with an automatic pressure release. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
With more than 275 cubic inches of capacity, the NANUK 968 waterproof case with a retractable handle and easy-glide wheels can store and haul a whole lot of gear. Built to organize, protect, carry and survive tough conditions, the 968 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and it’s six (6) PowerClaw latches. With NANUK’s exclusive locking and latching system, your case stays clamped shut and secured until you are ready to open it. The NANUK 968 hard case offers the maximum level of protection for all of your personal and professional equipment. This protective case adds the convenience of wheels to make it easier to travel with your photo gear, video gear, audio gear, bigger drones, medical or industrial equipment, outdoor gear and much more! Retractable handle and a set of wheels make this case one of the most convenient on the market. The NANUK 968's polyurethane wheels handle rough terrain with ease while the one-handed retractable handle offers unparalleled usability and comfort.The three (3) soft grip and ergonomic handles make the NANUK 968 easy to transport. They feature stainless steel hardware and spring loaded handles to keep them out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release. This transport case is also equipped with an automatic pressure release. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.